Datasheet4U Logo Datasheet4U.com

PN7120 - NFC controller

General Description

PN7120, the best plug'n play full NFC solution - easy integration into any OS environment, with integrated firmware and NCI interface designed for contactless communication at 13.56 MHz.

Key Features

  • Includes NXP ISO/IEC 14443-A and Innovatron ISO/IEC 14443-B intellectual property licensing rights.
  • ARM Cortex-M0 microcontroller core.
  • Highly integrated demodulator and decoder.
  • Buffered output drivers to connect an antenna with minimum number of external components.
  • Integrated RF level detector.
  • Integrated Polling Loop for automatic device discovery.
  • RF protocols supported.
  • NFCIP-1, NFCIP-2 protocol (see [7] and [10]).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PN7101 High and Low Side Driver Chipown
PN7103 Half-Bridge Driver Mosway
PN7103 High and Low Side Driver Chipown
PN7106 High and Low Side Driver Mosway
PN7106A High and Low Side Driver Mosway

Other Datasheets by NXP Semiconductors

Part Number Description
PN7150 High performance NFC controller
PN7160 NFC controller
PN7161 NFC controller
PN7220 NFC controller
PN7360 NFC Cortex-M0 microcontroller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PN7120 NFC controller with integrated firmware, supporting all NFC Forum modes Rev. 3.5 — 11 June 2018 Product data sheet 312435 COMPANY PUBLIC 1 Introduction This document describes the functionality and electrical specification of the NFC Controller PN7120. Additional documents describing the product functionality further are available for designin support. Refer to the references listed in this document to get access to the full for full documentation provided by NXP. In this document the term „MIFARE Classic card“ refers to a MIFARE Classic IC-based contactless card.