Datasheet4U Logo Datasheet4U.com

PTN3355 - Low power DisplayPort to VGA adapter

General Description

PTN3355 is a DisplayPort to VGA adapter with an integrated 1 : 2 VGA switch optimized primarily for motherboard applications, to convert a DisplayPort signal from the chip set to an analog video signal that directly connects to the VGA connector.

Key Features

  • 2.1 VESA-compliant DisplayPort converter.
  • Main Link: 1-lane and 2-lane modes supported.
  • HBR (High Bit Rate) at 2.7 Gbit/s per lane.
  • RBR (Reduced Bit Rate) at 1.62 Gbit/s per lane.
  • BER (Bit Error Rate) better than 109.
  • DisplayPort Link down-spreading supported.
  • 1 MHz AUX channel.
  • Supports native AUX CH syntax.
  • Supports I2C-bus over AUX CH syntax.
  • Active HIGH Hot Plug Detect (HPD) signal to the source 2.2 VESA-compliant eDP extensions.
  • Supports Al.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PTN3300A DVI/HDMI level shifter NXP Semiconductors
PTN3300B DVI and HDMI level shifter NXP Semiconductors
PTN3331 High speed differential line driver NXP Semiconductors
PTN3332 High speed differential line receiver NXP Semiconductors
PTN3341 High speed differential line driver NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
PTN3356 Flash-based low-power DisplayPort to VGA adapter
PTN3356R1 ROM-based low-power DisplayPort to VGA adapter
PTN3310 High-speed serial logic translators
PTN3311 High-speed serial logic translators
PTN3360A Enhanced Performance HDMI/DVI Level Shifter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PTN3355 Low power DisplayPort to VGA adapter with integrated 1 : 2 VGA switch Rev. 3.1 — 4 November 2016 Product data sheet 1. General description PTN3355 is a DisplayPort to VGA adapter with an integrated 1 : 2 VGA switch optimized primarily for motherboard applications, to convert a DisplayPort signal from the chip set to an analog video signal that directly connects to the VGA connector. PTN3355 integrates a DisplayPort receiver, a high-speed triple video digital-to-analog converter and 1 : 2 VGA switch that supports a wide range of display resolutions, for example, VGA to WUXGA (see Table 9). PTN3355 supports either one or two DisplayPort lanes operating at either 2.7 Gbit/s or 1.62 Gbit/s per lane. PTN3355 supports I2C-bus over AUX per DisplayPort standard (Ref.