S9KEAZN64AMLC Datasheet | NXP Semiconductors

features 1.1 Operating characteristics - Voltage range: 2.7 to 5.5 V - Flash write voltage range: 2.7 to 5.5 V - Temperature range (ambient): -40 to 125°C 1.2 Performance - Up to 40 MHz Arm® Cortex-M0+ core and up to 20 MHz bus clock - Single cycle 32-bit x 32-bit multiplier - Single cycle I/O access port 1.3 Memories and memory interfaces - Up to 64 KB flash - Up to 256 B EEPROM - Up to 4 KB RAM 1.4 Clocks - Oscillator (OSC) - supports 32.768 k Hz crystal or 4 MHz to 20 MHz crystal or ceramic resonator; choice of low power or high gain oscillators - Internal clock source (ICS) - internal FLL with internal or external reference, 31.25 k Hz pre-trimmed internal reference for 40 MHz system and core clock. - Internal 1 k Hz low-power oscillator (LPO) 1.5 System peripherals - Power management module (PMC) with three power modes: Run, Wait, Stop - Low-voltage detection (LVD) with reset or interrupt, selectable trip points - Watchdog with independent clock source (WDOG) - Programmable cyclic redundancy check module (CRC) - Serial wire debug interface (SWD) - Bit manipulation engine (BME) 1.6 Security and integrity modules - 64-bit unique identification (ID) number per chip NXP Semiconductors S9KEA64P64M20SF0 KEA64 Sub-Family Data Sheet Supports the following: S9KEAZN16AMLC(R), S9KEAZN32AMLC(R), S9KEAZN64AMLC(R), S9KEAZN16AMLH(R), S9KEAZN32AMLH(R), and S9KEAZN64AMLH(R) 1.7 Human-machine interface - Up to 57 general-purpose input/output (GPIO) - Two up to 8-bit keyboard interrupt modules (KBI) - External interrupt (IRQ) 1.8 Analog modules - One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC) - Two analog parators containing a 6-bit DAC and programmable reference input (ACMP) 1.9 Timers - One 6-channel Flex Timer/PWM...