Datasheet4U Logo Datasheet4U.com

SA56203 - One-chip motor driver

General Description

The SA56203 is a one-chip motor driver IC that is capable of driving all motors of CD or DVD systems e.g.

spindle, sled and loading motors and actuators on the optical pick-up unit.

The driver intended for the 3-phase, brushless, Hall-commutated spindle motor uses PWM switching.

Key Features

  • s Low heat generation due to power-efficient direct full-bridge switching of spindle motor driver s Controlled spindle motor current during acceleration and brake s Reverse torque brake function (full bridge) s Adjustable spindle motor current limiter s Internal regeneration for EMF of spindle motor s Current-steering PWM controlled stepper motor driver for sled s Four class-AB linear channels for loading motor and 3D actuators (focus, tracking and tilt) s Tracking actuator driver with back EMF a.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SA56202 One-chip motor driver Philips
SA5624 ACTUATOR DRIVER Silan Microelectronics
SA56 PULSE WIDTH MODULATION AMPLIFIER Apex Microtechnology
SA56-11EWA Single Digit Numeric Display Kingbright
SA56-11GWA Single Digit Numeric Display Kingbright

Other Datasheets by NXP Semiconductors

Part Number Description
SA56203S One-chip motor driver
SA5522 TSA5522
SA58603 High precision operational amplifier
SA58631 3W BTL Audio Amplifier
SA58632 2 x 2.2W BTL Audio Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SA56203 One-chip motor driver Rev. 01 — 30 September 2004 Preliminary data sheet 1. General description The SA56203 is a one-chip motor driver IC that is capable of driving all motors of CD or DVD systems e.g. spindle, sled and loading motors and actuators on the optical pick-up unit. The driver intended for the 3-phase, brushless, Hall-commutated spindle motor uses PWM switching. Internal regeneration of the back EMF of the spindle motor enables the driver to operate in current-steering mode without using external power-dissipating sense resistors. The driver for the 2-phase sled stepper motor operates in current-steering PWM mode. In addition the IC contains four full-bridge linear channels that can be used to drive a loading motor and 3D actuators (focus, tracking and tilt).