Datasheet4U Logo Datasheet4U.com

SA602A - Double-balanced mixer and oscillator

General Description

The SA602A is a low-power VHF monolithic double-balanced mixer with input amplifier, on-board oscillator, and voltage regulator.

It is intended for high-performance, low-power communication systems.

The guaranteed parameters of the SA602A make this device well-suited for cellular radio applications.

Key Features

  • Low current consumption: 2.4 mA typical.
  • Excellent noise figure:.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SA602 Double-Balanced Mixer and Oscillator Philips
SA60 AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSORS MIC
SA60 Transient Voltage Suppression (TVS) Diodes Crydom
SA60 Transient Voltage Suppressors Microsemi
SA60 TRANSIENT VOLTAGE SUPPRESSORS Digitron Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
SA600 1Ghz LNA and Mixer
SA604A High-performance low-power FM IF system
SA605 High performance low power mixer FM IF system
SA606 Low-voltage high performance mixer FM IF system
SA612A Double-balanced mixer and oscillator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SA602A Double-balanced mixer and oscillator Rev. 3 — 27 May 2014 Product data sheet 1. General description The SA602A is a low-power VHF monolithic double-balanced mixer with input amplifier, on-board oscillator, and voltage regulator. It is intended for high-performance, low-power communication systems. The guaranteed parameters of the SA602A make this device well-suited for cellular radio applications. The mixer is a ‘Gilbert cell’ multiplier configuration which typically provides 18 dB of gain at 45 MHz. The oscillator operates to 200 MHz. It can be configured as a crystal oscillator, a tuned tank oscillator, or a buffer for an external LO. For higher frequencies, the LO input may be externally driven. The noise figure at 45 MHz is typically less than 5 dB.