SAA7356HL Datasheet | NXP Semiconductors

INTEGRATED CIRCUITS DATA SHEET SAA7356HL 1394 SBP-2 link layer controller Preliminary specification File under Integrated Circuits, IC01 2000 Nov 17 Philips Semiconductors Preliminary specification 1394 SBP-2 link layer controller CONTENTS 1 2 3 4 5 6 7 7.1 7.2 7.3 7.4 7.4.1 7.4.2 7.4.3 7.5 7.6 8 8.1 8.2 8.3 Features GENERAL DESCRIPTION QUICK REFERENCE DATA ORDERING INFORMATION BLOCK DIAGRAM PIN CONFIGURATION FUNCTIONAL DESCRIPTION Overview SBP-2 automation engine DMA interface Microcontroller interface Intel 8031 interface support Hitachi H8 interface NEC V851 interface support Interrupt handling Address map for the SAA7356HL MICROCONTROLLER MUNICATION WITH THE SAA7356HL munications initiated by the microcontroller munications initiated by the SAA7356HL Interrupt registers 11 12 13 14 15 15.1 15.2 15.3 15.4 15.5 16 17 18 9 10 8.4 8.4.1 8.4.2 RAM access for parameter passing Register Access Register definitions for the register access method LIMITING VALUES REMENDED OPERATING CONDITIONS DC CHARACTERISTICS AC CHARACTERISTICS APPLICATION INFORMATION PACKAGE OUTLINE SOLDERING Introduction to soldering surface mount packages Reflow soldering Wave soldering Manual soldering Suitability of surface mount IC packages for wave and reflow soldering methods DATA SHEET STATUS DEFINITIONS DISCLAIMERS 2000 Nov 17 Philips Semiconductors Preliminary specification 1394 SBP-2 link layer controller 1 Features 2 GENERAL DESCRIPTION - Institute of Electrical and Electronics Engineers (IEEE) 1394-1995 standard link layer controller - patible with the P1394a standard - Fully automated Serial Bus Protocol 2 (SBP-2) transaction layer for data storage applications - Interface to many of the industry standard Direct Memory Access (DMA) protocols - Interface to any IEEE1394-1995 or P1394a PHY layer interface - Very low power ma mode - Small package - Single 3.3 V supply voltage with 5 V tolerance. 3 QUICK REFERENCE DATA SYMBOL VDD IDD SCLK 4...