Datasheet4U Logo Datasheet4U.com

SB0410 - Fully integrated quad valve controller

General Description

.

.

.

Key Features

  • Operating voltage 6.0 V to 36 V.
  • Four valves control.
  • Four current regulated valves up to 2.25 A (5.0 kHz).
  • Pump motor pre-driver up to 16 kHz PWM.
  • 16-bit SPI interface.
  • Three 10-bit ADC channels.
  • Two low-side driver for resistive charge (RDS(on) 14.0 Ω).
  • Die temperature warning.
  • Supervision.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SB040 MINIATURE SCHOTTKY BARRIER RECTIFIER General Semiconductor
SB040 SCHOTTKY BARRIER RECTIFIERS GALAXY ELECTRICAL
SB040 Miniature Schottky Barrier Rectifier Vishay
SB040 Schottky Barrier Rectifiers GOOD-ARK
SB0015-03A Schottky Barrier Diode Sanyo Semicon Device

Other Datasheets by NXP Semiconductors

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NXP Semiconductors Data Sheet: Advance Information Fully integrated quad valve controller system on chip Document Number: MC34SB0410 Rev. 3.0, 8/2016 SB0410 The SB0410 device is a SMARTMOS valve and motor controller system designed for use in harsh industrial environments. It has four high-current low-side drivers for use with solenoid valves, and highside gate pre-driver to control a DC motor through an inexpensive external Nchannel MOSFETs. Alongside this, the SB0410 has three analog to digital converters, plus two low-side driver allowing to drive resistive charges. The digital I/O pins can be configured for both 5.0 V and 3.3 V levels for easy connection to any microprocessor. The SB0410 uses standard SPI protocol communication.