Datasheet4U Logo Datasheet4U.com

SC18IS602B - I2C-bus to SPI bridge

Datasheet Summary

Description

The SC18IS602B is designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus.

This allows the microcontroller to communicate directly with SPI devices through its I2C-bus.

Features

  • I2C-bus slave interface operating up to 400 kHz.
  • SPI master operating up to 1.8 Mbit/s.
  • 200-byte data buffer.
  • Up to four slave select outputs.
  • Up to four programmable I/O pins.
  • Operating supply voltage: 2.4 V to 3.6 V.
  • Low power mode.
  • Internal oscillator option.
  • Active LOW interrupt output.
  • ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101.
  • Latch-up testing is done to JEDEC Standard.

📥 Download Datasheet

Datasheet preview – SC18IS602B

Datasheet Details

Part number SC18IS602B
Manufacturer NXP
File Size 244.42 KB
Description I2C-bus to SPI bridge
Datasheet download datasheet SC18IS602B Datasheet
Additional preview pages of the SC18IS602B datasheet.

📁 Similar Datasheet

  • SC18IS602 - I2C-bus to SPI bridge (NXP Semiconductors)
  • SC18IS603 - I2C-bus to SPI bridge (NXP Semiconductors)
  • SC183C - 2A Synchronous Step-Down Regulator (Semtech)
  • SC185 - 4A Synchronous Step-Down Regulator (Semtech)
  • SC186 - 4A Synchronous Step-Down Regulator (Semtech)
  • SC1869 - Adaptive RF Power Amplifier Linearizer (Maxim Integrated)
  • SC187 - 2.2MHz Synchronous Step-Down Regulator (Semtech)
  • SC1889 - Adaptive RF Power Amplifier Linearizer and Dual RMS Power Measurement (Maxim Integrated)
  • SC189 - 1.5A Synchronous Step Down Regulator (Semtech)
  • SC1894 - 225MHz to 3800MHz RF Power Amplifier Linearizer (Maxim Integrated)
Other Datasheets by NXP
  • SC18IS600 - SPI to I2C-bus interface
  • SC18IS601 - SPI to IC-bus interface
  • SC18IM700 - Master I-2C - bus controller
  • SC16C2550 - Dual UART with 16 bytes of transmit and receive FIFOs and infrared (IrDA) encoder/decoder
  • SC16C2550B - dual UART
  • SC16C2552 - Dual UART with 16-byte transmit and receive FIFOs
  • SC16C550 - Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder
  • SC16C554 - Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder

Full PDF Text Transcription

Click to expand full text
SC18IS602B I2C-bus to SPI bridge Rev. 7 — 21 October 2019 Product data sheet 1. General description The SC18IS602B is designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I2C-bus. The SC18IS602B operates as an I2C-bus slave-transmitter or slave-receiver and an SPI master. The SC18IS602B controls all the SPI bus-specific sequences, protocol, and timing. The SC18IS602B has its own internal oscillator, and it supports four SPI chip select outputs that may be configured as GPIO when not used. 2. Features and benefits  I2C-bus slave interface operating up to 400 kHz  SPI master operating up to 1.
Published: |