Datasheet4U Logo Datasheet4U.com

SLRC610 Datasheet High-performance Icode Frontend

Manufacturer: NXP Semiconductors

Overview: SLRC610 High-performance ICODE frontend SLRC610 and SLRC610 plus Rev. 5.

General Description

SLRC610, the low-cost RFID frontend.

The SLRC610 multi-protocol NFC frontend IC supports the following operating modes: • Read/write mode supporting ISO/IEC 15693 • Read/write mode supporting ICODE EPC UID/ EPC OTP • Read/write mode supporting ISO/IEC 18000-3 mode 3/ EPC Class-1 HF The SLRC610 supports the vicinity protocol according to ISO/IEC15693, EPC UID and ISO/IEC 18000-3 mode 3/ EPC Class-1 HF.

The following host interfaces are supported: • Serial Peripheral Interface (SPI) • Serial UART (similar to RS232 with voltage levels dependent on pin voltage supply) • I2C-bus interface (two versions are implemented: I2C and I2CL) The SLRC610 supports the connection of a secure access module (SAM).

Key Features

  • RFID frontend.
  • Supports ISO/IEC15693, ICODE EPC UID and ISO/IEC 18000-3 mode 3/ EPC Class-1 HF.
  • Low-power card detection.
  • Antenna connection with minimum number of external components.
  • Supported host interfaces:.
  • SPI up to 10 Mbit/s.
  • I2C-bus interfaces up to 400 kBd in Fast mode, up to 1000 kBd in Fast mode plus.
  • RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on pin voltage supply.
  • Separate I2C-b.

More Datasheets from NXP Semiconductors

Part Number Description
SLRM900 I-CODE Long range reader module hardware
SLRM900AFB I-CODE Long range reader module hardware

SLRC610 Distributor