SSL5018TE Datasheet | NXP Semiconductors

description The SSL5018TE is a high-voltage Integrated Circuit (IC) controller with an integrated MOSFET for driving LED lamps in general mains non-dimmable lighting applications. The IC operates with input voltages up to 230 V (AC). The main benefits of these products are: - Small Printed-Circuit Board (PCB) footprint, and pact solution - High efficiency (up to 93 %) - High input power factor (> 0.95); Low Total Harmonic Distortion (THD; < 20 %) - Intermediate power factor (PF > 0.7); low ripple (< 5 %); minimum external ponent count - Enhanced power capability - Low electronic Bill Of Material (BOM) The SSL5018TE operates in Boundary Conduction Mode (BCM) with peak current modulation, providing an input power factor correction. The IC is typically configured to a buck converter. It can start up directly from the HV pin using an internal high-voltage current source. When the converter is switching, VCC is supplied through the DVDT pin by a capacitor coupled to the DRAIN pin or by an auxiliary supply. This feature simplifies the VCC supply. It allows a low-cost off-the-shelf inductor to be used, providing flexibility in application design. The IC supply current is 1.3 m A. The SSL5018TE es in a pact HSO8 package incorporating an exposed pad to enhance the thermal capability for high-power applications, like 18 W T-LEDs or higher power lamps. 2. Features and benefits - Driving LED strings from a rectified mains supply - Highly integrated switch mode LED driver with integrated 600 V (DC) power switches - Efficient BCM operation with: - No reverse recovery losses in freewheel diode - Zero Current Switching (ZCS) for turn-on of switch - Zero voltage or valley switching for turn-on of switch - Minimal required inductance value and size - Direct PWM current regulation possible - Fast transient response through peak current mode control: NXP Semiconductors SSL5018TE pact non-dimmable LED driver IC - No overshoots or undershoots in the LED current - Internal...