Datasheet4U Logo Datasheet4U.com

TDA1029 - Signal-sources switch

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA1022 BUCKET BRIGADE DELAY LINE ETC
TDA1023 Proportional-control triac Philips
TDA1024 ZERO CROSSING TRIAC TRIGGER Signetics
TDA1024 A MAINS-ZERO TRIAC-TRIGGERING Philips
TDA10023HT Single chip DVB-C/MCNS channel receiver Philips

Other Datasheets by NXP Semiconductors

Part Number Description
TDA1020 12 W car radio power amplifier
TDA1023 Proportional-control triac
TDA1023T Proportional-control triac
TDA1028 Signal Souces Switch
TDA1001B Interference and noise suppression circuit for FM receivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA1029 Signal-sources switch Product speciļ¬cation File under Integrated Circuits, IC01 January 1980 Philips Semiconductors Signal-sources switch Product speciļ¬cation TDA1029 The TDA1029 is a dual operational amplifier (connected as an impedance converter) each amplifier having 4 mutually switchable inputs which are protected by clamping diodes. The input currents are independent of switch position and the outputs are short-circuit protected. The device is intended as an electronic two-channel signal-source switch in a.f. amplifiers. QUICK REFERENCE DATA Supply voltage range (pin 14) Operating ambient temperature Supply voltage (pin 14) Current consumption Maximum input signal handling (r.m.s.