TDA1516CQ Datasheet | NXP Semiconductors

INTEGRATED CIRCUITS DATA SHEET TDA1516CQ 24 W BTL car radio power amplifier Product specification File under Integrated Circuits, IC01 July 1994 Philips Semiconductors Product specification 24 W BTL car radio power amplifier Features - Requires very few external ponents for Bridge-Tied Load (BTL) - High output power (without bootstrap) - Low offset voltage at output (important for BTL) - Fixed gain - Good ripple rejection - Mute/stand-by switch - Load dump protection - AC and DC short-circuit-safe to ground and VP - Thermally protected - Reverse polarity safe QUICK REFERENCE DATA SYMBOL VP PARAMETER positive supply voltage range operating non-operating load dump IORM IP Isb Isw ZI TXTAL PO SVRR Vno ∆Vos repetitive peak output current total quiescent current stand-by current switch-on current input impedance BTL crystal temperature output power supply voltage ripple rejection noise output voltage DC output offset voltage THD = 10%; 4 Ω RS = 0; f = 100 Hz f = 1 to 10 k Hz 6.0 - - - - - - 25 - - 45 48 - - CONDITIONS MIN. GENERAL DESCRIPTION - Capability to handle high energy on outputs (VP = 0) - Protected against electrostatic discharge - No switch-on/switch-off plop - Flexible leads - Low thermal resistance - Identical inputs (inverting and non-inverting). The TDA1516CQ is a monolithic integrated class-B output amplifier in a 13-lead single-in-line (SIL) plastic power package. The device is primarily developed for car radio...