Datasheet4U Logo Datasheet4U.com

TDA1522 - Stereo cassette head preamplifier/equalizer

General Description

The TDA1522 is a playback amplifier for car radio/cassette players.

MAX.

UNIT V mA °C % dB ORDERING INFORMATION TYPE NUMBER TDA1522 PACKAGE NAME SIL9MP DESCRIPTION plastic single in-line medium power package; 9 leads VERSION SOT142-1 1996 Feb 26 2 Philips S

Key Features

  • Two independent amplifiers with open-loop gain of 90 dB (typical).
  • Internal DC feedback via 140 kΩ resistor from output to feedback point.
  • AC characteristics that can be determined externally by an RC network.
  • Electronic on/off switching with transient suppression for switch on.
  • Head input at DC ground that eliminates the input coupling capacitor.
  • Minimum external component requirement.
  • Stability down to a gain of 30 dB.
  • Lo.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA1520A 20W Hi-Fi Audio Amplifier Philips
TDA1520B 20W HI-FI AUDIO POWER AMPLIFIER ETC
TDA1520BQ 20W HI-FI AUDIO POWER AMPLIFIER ETC
TDA1525 Stereo Tone / Volume Controller Signetics
TDA150-002 XGA TFT-LCD BOE

Other Datasheets by NXP Semiconductors

Part Number Description
TDA1521 2 x 12 W hi-fi audio power amplifier
TDA1521A 2 x 6 W hi-fi audio power amplifier
TDA1521Q 2 x 12 W hi-fi audio power amplifier
TDA1523 Stereo cassette head preamplifier/equalizer
TDA1524A Stereo-tone/volume controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA1522 Stereo cassette head preamplifier and equalizer Product specification File under Integrated Circuits, IC01 1996 Feb 26 Philips Semiconductors Product specification Stereo cassette head preamplifier and equalizer FEATURES • Two independent amplifiers with open-loop gain of 90 dB (typical) • Internal DC feedback via 140 kΩ resistor from output to feedback point • AC characteristics that can be determined externally by an RC network • Electronic on/off switching with transient suppression for switch on • Head input at DC ground that eliminates the input coupling capacitor • Minimum external component requirement • Stability down to a gain of 30 dB • Low input noise • Low distortion • DC input current <2 µA • Wide supply voltage range.