NXP Semiconductors TDA3615J
The TDA3615J is a multiple output voltage regulator with power switches, intended for use in car radios with or without a microprocessor. It contains: • One fixed voltage regulator (regulator 1) intended to supply a microprocessor, that also operates during load dump and thermal shutdown • 5 power regulators supplied by VI(ig) • 3 power switches with protections • 3 enable inputs for selecting regulators 2 to 6 and the three power switches • Very low quiescent current of typical 110 µA. The quiescent current is measured when RL = ∞.| Part No. | TDA3615J |
|---|---|
| Datasheet | TDA3615J Download |
| Manufacturer |  NXP Semiconductors |
| Description | Multiple voltage regulator |
| Buy | Stock & Price |
FEATURES
General● Six voltage regulators
● Five microprocessor controlled regulators (regulators 2 to 6)
● Regulator 1 and reset operate during load dump and thermal shutdown
● Low reverse current of regulator 1
● Very low quiescent current when regulators 2 to 6 and power switches are switched off (VI(ig) = 0 V)
● Reset output
● Adjustable display regulator
● High ripple rejection
● Three power switches
● Low noise for regulators 2 to 6. Protections
● Reverse polarity safe (down to −18 V without high reverse current)
● Able to withstand voltages up to 18 V at the output (supply line may be short-circuited)
● ESD protected on all pins
● Thermal protection
● Load dump protection
● Foldback current limit protection (except for regulator 2)
● The regulator outputs and the power switches are DC short-circuited safe to ground and Vbat. ORDERING INFORMATION TYPE NUMBER TDA3615J PACKAGE NAME DBS17P
DESCRIPTION
plastic DIL-bent-SIL power package; 17 leads (lead length 12 mm) GENERAL DESCRIPTI...
