Datasheet4U Logo Datasheet4U.com

TDA4800 - Vertical deflection

General Description

plastic DIL-bent-SIL power package; 13 leads (lead length 12 mm) PARAMETER supply voltage (pin 6) supply voltage (pin 10) supply current (pins 6 and 10) output current (peak-to-peak value) picture frequency positive sync input pulse negative sync input pulse operating ambient temperature note 3 note

Key Features

  • Fully integrated, few external components.
  • RC oscillator with wide sync range of 1 : 3 (e. g. 50 to 150 Hz).
  • Synchronization by positive or negative going sync pulse.
  • Blanking pulse duration is determined externally.
  • Dual frequency criterion for automatic amplitude switch-over (e. g. 50 to 60 Hz).
  • Guard circuit for screen protection.
  • Sawtooth generator with buffer stage supplied by external voltage.
  • Preamplifier.
  • Pow.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA4814 Power Factor Controller Siemens Semiconductor
TDA4817 Power Factor Controller Siemens Semiconductor
TDA4862 Power-Factor Controller Siemens Semiconductor
TDA4862 Power-Factor Controller (PFC) IC Infineon
TDA4863 Boost Controller Infineon Technologies

Other Datasheets by NXP Semiconductors

Part Number Description
TDA4810 SYNC PROCESSOR AND HORIZONTAL DRIVE
TDA4820T Sync separation
TDA4821P Autosize
TDA4841PS I2C-bus autosync deflection controller
TDA4850 Horizontal and vertical deflection controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA4800 Vertical deflection circuit for monitor applications Product specification Supersedes data of February 1992 File under Integrated Circuits, IC02 1997 Mar 27 Philips Semiconductors Product specification Vertical deflection circuit for monitor applications FEATURES • Fully integrated, few external components • RC oscillator with wide sync range of 1 : 3 (e.g. 50 to 150 Hz) • Synchronization by positive or negative going sync pulse • Blanking pulse duration is determined externally • Dual frequency criterion for automatic amplitude switch-over (e.g.