TDA5744 Datasheet PDF - NXP Low power mixers/oscillators for hyperband tuners Specs

TDA5744 - Low power mixers/oscillators for hyperband tuners

Datasheet Summary

Description

The TDA5744 and TDA5745 are 2-band mixers/oscillators intended for VHF/UHF and hyperband tuners (see Fig.1).

The Integrated Circuits (ICs) include two double balanced mixers and two oscillators, for the VHF and UHF band, and an IF amplifier.

Features

Mixers/oscillators for hyperband tuners.
Balanced mixer with a common emitter input for VHF (single input).
Balanced mixer with a common base input for UHF (double input).
4-pin common emitter oscillator for VHF.
4-pin common emitter oscillator for UHF.
Electronic band switch.
IF amplifier with a low output impedance to drive the SAW filter directly (≈2 kΩ load).
Low power, low radiation and small size.
Pin compati.

Datasheet Details

Part number	TDA5744
Manufacturer	NXP
File Size	123.15 KB
Description	Low power mixers/oscillators for hyperband tuners
Datasheet	TDA5744 Datasheet
Additional preview pages of the TDA5744 datasheet.

📁 Similar Datasheet

TDA5702 - 8 Bit Digital-to-Analog Converter (Signetics)

TDA5703 - Analog-to-Digital Converter (Signetics)

TDA5708 - Photo Diode Signal Processor (Philips)

TDA5709 - Radial Error Signal Processor (Philips)

TDA5100A - ASK Transmitter 434 MHz (Infineon Technologies)

TDA5101A - ASK Transmitter 315 MHz (Infineon Technologies)

TDA5102 - ASK/FSK Transmitter 915 MHz (Infineon Technologies)

TDA5103A - ASK Transmitter 345 MHz (Infineon Technologies)

TDA5110 - Wireless Components (Infineon Technologies)

TDA5111 - Wireless Components (Infineon Technologies)

Full PDF Text Transcription

Click to expand full text

INTEGRATED CIRCUITS DATA SHEET TDA5744; TDA5745 Low power mixers/oscillators for hyperband tuners Preliminary speciﬁcation File under Integrated Circuits, IC02 1998 Mar 09 Philips Semiconductors Preliminary speciﬁcation Low power mixers/oscillators for hyperband tuners FEATURES • Mixers/oscillators for hyperband tuners • Balanced mixer with a common emitter input for VHF (single input) • Balanced mixer with a common base input for UHF (double input) • 4-pin common emitter oscillator for VHF • 4-pin common emitter oscillator for UHF • Electronic band switch • IF amplifier with a low output impedance to drive the SAW filter directly (≈2 kΩ load) • Low power, low radiation and small size • Pin compatible single-chip synthesizer mixer/oscillator for Full Scale Tuners (FST) are available:

Published: Apr 23, 2005 |