NXP Semiconductors TDA8006
The TDA8006 is controlled either through a standard serial interface or a parallel bus, it takes care of all ISO 7816, EMV and GSM11.11 requirements. It gives the card and the set a very high level of security due to its special hardware against ESD, short circuit, power failure, etc. Its integrated step-up converter allows operation within a supply voltage range of 4.2 to 6 V.| Part No. | TDA8006 |
|---|---|
| Datasheet | TDA8006 Download |
| Manufacturer |  NXP Semiconductors |
| Description | Multiprotocol IC Card coupler |
| Buy | Stock & Price |
FEATURES
● 80C52 core with 16 kbyte ROM and 256 byte RAM● Extra 1 kbyte RAM outside the core for data storage
● Control and communication through a standard RS232 full duplex interface or a parallel interface
● Specific ISO 7816 UART with parallel access on I/O for automatic convention processing, variable baud rate through frequency or division ratio programming, error management at character level for T = 0, extra guard time register
● VCC generation (5 V ±5% or 3 V ±5%, 65 mA maximum with controlled rise and fall times)
● Card clock generation (up to 10 MHz) with two times synchronous frequency doubling
● Card clock STOP HIGH, clock STOP LOW or 1.25 MHz (from internal oscillator) for card power-down mode
● CLKOUT output for clocking external devices with either fxtal, 1⁄2fxtal or 1⁄4fxtal
● Automatic activation and deactivation sequence through an independent sequencer
● Supports the asynchronous protocols T = 0 and T = 1 in accordance with ISO 7816, Europay, Mastercard and Visa (E...
