NXP Semiconductors TDA8262HN
The direct conversion QPSK demodulator is the front-end receiver dedicated to digital TV broadcasting, satisfying both DVB-S and DBS TV standards. The wide range oscillator (from 950 MHz to 2175 MHz) covers the American, European and Asian satellite bands, as well as the SMA-TV US standard.TDA8262HN Specifications
- Terminals : 32
- Circuits : 1
- Max Operating Temp : 85°C
- Min Operating Temp : -20°C
- Max Supply Current : 175mA
Source:
Octopart
FEATURES
s s s s s Direct conversion QPSK and 8PSK demodulation (ZIF) 3.3 V DC supply voltage (no 30 V required) Power-down modes selectable by bus 950 MHz to 2175 MHz frequency range High range input level; x −70 dBm to −15 dBm at 75 Ω (normal mode) x Up to 0 dBm (20 dB attenuation configuration). Low noise RF input (integrated LNA) RF loop-through 0 dB to 55 dB continuous variable gain on RF input RF input level detector Switchable 0 dB to 9 dB additional gain on baseband output amplifier High AGC linearity (< 0.7 dB/step when used with an 8-bit DAC), AGC controlled voltage between 0.3 V and 3 V Programmable 5 MHz to 36 MHz 5th-order baseband filters for I and Q paths Fully integrated PLL frequency synthesizer Low phase noise fully integrated oscillator Operation from a 16 MHz crystal or external clock 5 frequency steps from 125 kHz to 2 MHz Crystal frequency output to drive the demodulator IC Compatible with 5 V and 3.3 V I2C-bus Fully compatible and easy to interface with the PS digital satellite demodulators family 32-pin low thermal resistance package. s s s s s s s s s s s s s s s 3.