Datasheet4U Logo Datasheet4U.com

TDA8543 Datasheet 2 W Btl Audio Amplifier

Manufacturer: NXP Semiconductors

Overview: INTEGRATED CIRCUITS DATA SHEET TDA8543 2 W BTL audio amplifier Product specification File under Integrated Circuits, IC01 1997 Jun 12 Philips Semiconductors Product specification 2 W BTL audio.

General Description

TDA8543 The TDA8543(T) is a one channel audio power amplifier for an output power of 2 W with an 8 Ω load at a 7.5 V supply.

The circuit contains a BTL amplifier with a plementary PNP-NPN output stage and standby/mute logic.

The TDA8543T es in a 16 pin SO package and the TDA8543 in a 16 pin DIP package.

Key Features

  • Flexibility in use.
  • Few external components.
  • Low saturation voltage of output stage.
  • Gain can be fixed with external resistors.
  • Standby mode controlled by CMOS compatible levels.
  • Low standby current.
  • No switch-on/switch-off plops.
  • High supply voltage ripple rejection.
  • Protected against electrostatic discharge.
  • Outputs short-circuit safe to ground, VCC and across the load.
  • Thermally protected. QUIC.

More Datasheets from NXP Semiconductors

Part Number Description
TDA8540 4 X 4 video switch matrix
TDA8541 1 W BTL audio amplifier
TDA8542 2 x 1 W BTL audio amplifier
TDA8542AT 2 x 1.5 W BTL audio amplifier
TDA8542TS 2 x 0.7 W BTL audio amplifier
TDA8547 2 x 1 W BTL audio amplifier with output channel switching
TDA8547TS 2 x 0.7 W BTL audio amplifier with output channel switching
TDA8501 PAL/NTSC encoder
TDA8505 SECAM encoder
TDA8510J 26 W BTL and 2 x 13 W SE power amplifiers

TDA8543 Distributor