Datasheet4U Logo Datasheet4U.com

TDA8563AQ - stereo BTL car radio power amplifier

General Description

The TDA8563AQ is an integrated class-B output amplifier in a 13-lead single-in-line (SIL) power package.

It contains 2 × 40 W/2 Ω amplifiers in a BTL configuration.

The device is primarily developed for car radio applications.

Key Features

  • Requires very few external components.
  • High output power.
  • 4 Ω and 2 Ω load impedance.
  • Low output offset voltage.
  • Fixed gain.
  • Diagnostic facility (distortion, short-circuit and temperature detection).
  • Good ripple rejection.
  • Mode select switch (operating, mute and standby).
  • Load dump protection.
  • Short-circuit safe to ground, to VP and across the load.
  • Low power dissipation in any short-circuit condi.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8566 stereo BTL car radio power amplifier NXP Semiconductors
TDA8547 2 x 0.7W BTL AUDIO AMPLIFIER UTC
TDA8559T Low-voltage stereo headphone amplifier Philips
TDA8577 Dual common-mode rejection differential line receiver Philips
TDA8588AJ Power Amplifier and Multiple Voltage Regulator Philips

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8563Q stereo BTL car radio power amplifier
TDA8560Q 2 x 40 W/2 ohm stereo BTL car radio power amplifier with diagnostic facility
TDA8561Q 2 x 24 W BTL or 4 x 12 W single-ended car radio power amplifier
TDA8562Q 4 x 12 W single-ended car radio power amplifier with dynamic distortion detector and diagnostic interface
TDA8564Q 2 x 24 W BTL or 4 x 12 W single-ended car radio power amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA8563AQ 2 × 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility Product specification Supersedes data of 1997 Feb 20 File under Integrated Circuits, IC01 2001 Feb 21 Philips Semiconductors 2 × 40 W/2 Ω stereo BTL car radio power amplifier with diagnostic facility Product specification TDA8563AQ FEATURES • Requires very few external components • High output power • 4 Ω and 2 Ω load impedance • Low output offset voltage • Fixed gain • Diagnostic facility (distortion, short-circuit and temperature detection) • Good ripple rejection • Mode select switch (operating, mute and standby) • Load dump protection • Short-circuit safe to ground, to VP and across the load • Low power dissipation in any short-circuit condition • Thermally protected