Datasheet4U Logo Datasheet4U.com

TDA8579T - Dual common-mode rejection differential line receiver

General Description

The TDA8579T is a two channel differential amplifier with 0 dB gain and low distortion.

The device has been primarily developed for car radio applications where long connections between signal sources and amplifiers (or boosters) are necessary and where ground noise has to be eliminated.

Key Features

  • Excellent common-mode rejection, up to high frequencies.
  • Elimination of source resistance dependency in the common-mode rejection.
  • Few external components.
  • High supply voltage ripple rejection.
  • Low noise.
  • Low distortion.
  • All pins protected against electrostatic discharge.
  • AC and DC short-circuit safe to ground and VCC.
  • Fast DC settling 3. Quick reference data Table 1. Symbol VCC ICC GV SVRR Vno |Zi| CMRR Quick reference data Parameter supply volta.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8577 Dual common-mode rejection differential line receiver Philips
TDA8547 2 x 0.7W BTL AUDIO AMPLIFIER UTC
TDA8559T Low-voltage stereo headphone amplifier Philips
TDA8566 stereo BTL car radio power amplifier NXP Semiconductors
TDA8588AJ Power Amplifier and Multiple Voltage Regulator Philips

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8579 Dual common-mode rejection differential line receiver
TDA8571J 4 x 40 W BTL quad car radio power amplifier
TDA8574 Class-H high-output voltage level line driver
TDA8575 Ground noise isolation amplifier
TDA8576T Class-H high-output voltage level line driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TDA8579T Dual common-mode rejection differential line receiver Rev. 4 — 23 September 2013 Product data sheet 1. General description The TDA8579T is a two channel differential amplifier with 0 dB gain and low distortion. The device has been primarily developed for car radio applications where long connections between signal sources and amplifiers (or boosters) are necessary and where ground noise has to be eliminated. The device is intended to be used to receive line inputs in audio applications that require a high level of common-mode rejection. The device is contained in an 8-pin Small Outline (SO) package. 2.