Datasheet4U Logo Datasheet4U.com

TDA8775 - Triple 10-bit video Digital-to-Analog Converter DAC

General Description

plastic low profile quad flat package; 48 leads; body 7 × 7 × 1.4 mm SLT = 1; RL = 37.5 Ω SLT = 0; RL = 150 Ω SLT = 1; RL = 37.5 Ω SLT = 0; RL = 150 Ω CONDITIONS MIN.

50 35

TYP.

Key Features

  • 10-bit resolution.
  • Sampling rate up to:.
  • 50 MHz for normal mode; RL = 37.5 Ω.
  • 35 MHz for LOW power mode; RL = 150 Ω.
  • Internal current reference.
  • Current reference selector for:.
  • normal mode, RL = 37.5 Ω (typ. ).
  • low-power mode, RL = 150 Ω (typ. ).
  • No deglitching circuit required.
  • SYNC and BLANK control inputs.
  • 0.66 V output voltage range on red and blue channels.
  • 1 V output voltage range on.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8777 Triple 10-bit video DAC up to 330 MHz sample frequency NXP Semiconductors
TDA8715 8-Bit High-Speed Analog-to-Digital Converter Philips
TDA8025 IC card interface NXP Semiconductors
TDA8035HN Smart card interface NXP Semiconductors
TDA8060ATS Satellite ZERO-IF QPSK down-converter Philips

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8771A Triple 8-bit video Digital-to-Analog Converter DAC
TDA8772 Triple 8-bit video digital-to-analog converter
TDA8776 10-bit/ 500 Msps Digital-to-Analog Converter DAC
TDA8776A 10-bit/ 1000 Msps Digital-to-Analog Converter DAC
TDA8779 10-bit converter interface ADC/DAC for quadrature transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA8775 Triple 10-bit video Digital-to-Analog Converter (DAC) Preliminary specification File under Integrated Circuits, IC02 1996 Aug 14 Philips Semiconductors Preliminary specification Triple 10-bit video Digital-to-Analog Converter (DAC) FEATURES • 10-bit resolution • Sampling rate up to: – 50 MHz for normal mode; RL = 37.5 Ω – 35 MHz for LOW power mode; RL = 150 Ω • Internal current reference • Current reference selector for: – normal mode, RL = 37.5 Ω (typ.) – low-power mode, RL = 150 Ω (typ.) • No deglitching circuit required • SYNC and BLANK control inputs • 0.66 V output voltage range on red and blue channels • 1 V output voltage range on green channel (including sync) • BLANK control input on the 3 channels • + 5 V power supply.