Datasheet4U Logo Datasheet4U.com

TDA9952 - 25 Msps analog-to-digital interface for CCD cameras

General Description

The TDA9952 is a 10-bit analog-to-digital interface for CCD cameras.

Key Features

  • Sample rate = 25 Msps;10-bit resolution.
  • Single 3.0 V supply operation (2.2 to 3.6 V operation for the digital outputs).
  • Low power consumption: only 115 mW at 2.7 V.
  • Power consumption in standby mode: 4.5 mW (typical value).
  • Programmable gain amplifier: gain range = 36 dB in 0.1 dB steps.
  • Correlated double sampling.
  • Internal input buffer for the correlated double sampling.
  • Fully programmable via a 3-wire serial interface.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA9935 Dual 14-bit up to 160 Msample/s 2 interpolating Digital-to-Analog Converter NXP Semiconductors
TDA9981B HDMI transmitter up to 150 MHz pixel rate NXP Semiconductors
TDA9984A HDMI 1.3 transmitter NXP Semiconductors
TDA9991HL Vertical line driver and DC-DC converter Philips
TDA9045 VIDEO PROCESSOR AND INPUT SELECTOR ETC

Other Datasheets by NXP Semiconductors

Part Number Description
TDA9901 Wideband differential digital controlled variable gain amplifier
TDA9910 Analog-to-Digital Converter (ADC) direct/ultra high IF sampling
TDA9917 up to 250 Msample/s Analog-to-Digital Converter (ADC)
TDA9962 12-bit/ 3.0 V/ 20 Msps analog-to-digital interface for CCD cameras
TDA9964 12-bit/ 3.0 V/ 30 Msps analog-to-digital interface for CCD cameras

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com INTEGRATED CIRCUITS DATA SHEET TDA9952 10-bit, 3.0 V, 25 Msps analog-to-digital interface for CCD cameras Preliminary specification Supersedes data of 2001 Jul 04 2002 Aug 21 www.DataSheet4U.com Philips Semiconductors Preliminary specification 10-bit, 3.0 V, 25 Msps analog-to-digital interface for CCD cameras FEATURES • Sample rate = 25 Msps;10-bit resolution • Single 3.0 V supply operation (2.2 to 3.6 V operation for the digital outputs) • Low power consumption: only 115 mW at 2.7 V • Power consumption in standby mode: 4.5 mW (typical value) • Programmable gain amplifier: gain range = 36 dB in 0.