NXP Semiconductors TDF8541
The TDF8541 is one of a new generation of complementary quad Bridge-Tied Load (BTL) audio power amplifiers intended for automotive applications. It has full I2C-bus controlled diagnostics, including start-up diagnostics. The TDF8541 can operate at a battery voltage as low as 6 V making this amplifier suitable for stop/start-car operation.| Part No. | TDF8541 |
|---|---|
| Datasheet | TDF8541 Download |
| Manufacturer |  NXP Semiconductors |
| Description | I2C-bus controlled 4 x 45 W power amplifier |
| Buy | Stock & Price |
FEATURES AND BENEFITS
● Stop/start-car prepared: keeps operating without audible disturbance during engine start at a battery voltage as low as 6 V● Operates in either legacy (non I2C-bus) or I2C-bus modes (3.3 V and 5 V compliant)
● Four hardware-programmable I2C-bus addresses
● Can drive 2 and 4 loads
● Speaker fault detection
● Start-up diagnostics with load detection: open, short, present; filtered for door-slam and chatter relays
● AC load (tweeter) detection with low and high current mode
● Gain select after start-up without audible disturbance
● Independent selectable soft mute of front and rear channels
● Programmable gain (26 dB and 16 dB), independently programmable for the front and rear channels
● Line driver mode supports engine start at a battery voltage as low as 6 V (16 dB and mid-tap voltage 0.25VP)
● Programmable clip detect: 2 %, 5 % or 10 %
● Programmable thermal pre-warning
● Pin STB can be programmed/multiplexed with second-clip detect
● Clip information of e...
