Datasheet4U Logo Datasheet4U.com

TEA2206T - Active bridge rectifier controller

General Description

The TEA2206T is an active bridge rectifier controller for replacing the two low-side diodes in the traditional diode bridge with MOSFETs.

Key Features

  • 2.1 Efficiency features.
  • Forward conduction losses of the diode rectifier bridge are reduced.
  • Very low IC power consumption (2 mW) 2.2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TEA223M0JBK-2243 (TEA Series) Aluminum Electrolytic Capacitors Lelon Electronics
TEA2260 SWITCH MODE POWER SUPPLY CONTROLLER ST Microelectronics
TEA2261 SWITCH MODE POWER SUPPLY CONTROLLER ST Microelectronics
TEA2262 SWITCH MODE POWER SUPPLY CONTROLLER ST Microelectronics
TEA22xxxx (TEA Series) Aluminum Electrolytic Capacitors Lelon Electronics

Other Datasheets by NXP Semiconductors

Part Number Description
TEA2208T Active bridge rectifier controller
TEA2209T Active bridge rectifier controller
TEA2016AAT Digital controller
TEA2017AAT Digital configurable LLC and multimode PFC controller
TEA2093TS GreenChip synchronous rectifier controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TEA2206T Active bridge rectifier controller Rev. 1.1 — 14 April 2021 Product data sheet 1 General description The TEA2206T is an active bridge rectifier controller for replacing the two low-side diodes in the traditional diode bridge with MOSFETs. Using the TEA2206T with low-ohmic high-voltage external MOSFETs significantly improves the efficiency of the power converter as the typical rectifier-diode forwardconduction losses are reduced by 50 %. Efficiency can improve up to about 0.7 % at 90 V (AC) mains voltage. The TEA2206T is fabricated in a silicon-on-insulator (SOI) process. 2 Features and benefits 2.1 Efficiency features • Forward conduction losses of the diode rectifier bridge are reduced • Very low IC power consumption (2 mW) 2.