NXP Semiconductors TJA1055
The TJA1055 is the interface between the protocol controller and the physical bus wires in a Controller Area Network (CAN). It is primarily intended for low-speed applications up to 125 kBd in passenger cars. The device provides differential receive and transmit capability but will switch to single-wire transmitter and/or receiver in error conditions.| Part No. | TJA1055 |
|---|---|
| Datasheet | TJA1055 Download |
| Manufacturer |  NXP Semiconductors |
| Description | Enhanced Fauit Tolerant CAN Transceiver |
| Buy | Stock & Price |
FEATURES
2.1 Optimized for in-car low-speed communication I I I I I I I I I Pin-to-pin compatible with TJA1054 and TJA1054A Baud rate up to 125 kBd Up to 32 nodes can be connected Supports unshielded bus wires Very low ElectroMagnetic Emission (EME) due to built-in slope control function and a very good matching of the CANL and CANH bus outputs Very high ElectroMagnetic Immunity (EMI) in normal operating mode and in low power modes Fully integrated receiver filters Transmit Data (TxD) dominant time-out function High ESD robustness N ±8 kV Electrostatic Discharge (ESD) protection Human Body Model (HBM) for off-board pins N ±6 kV Electrostatic Discharge (ESD) protection IEC 61000-4-2 for off-board pins Low-voltage microcontroller support I 2.2 Bus failure management I Supports single-wire transmission modes with ground offset voltages up to 1.5 V I Automatic switching to single-wire mode in the event of bus failures, even when the CANH bus wire is short-circuited to VCC NXP Semiconductors...
