TJA1442AT Overview
The TJA1442 is a member of the TJA144x family of transceivers that provide an interface between a Controller Area Network (CAN) or CAN FD (Flexible Data rate) protocol controller and the physical two-wire CAN bus. TJA144x transceivers implement the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5, and are fully interoperable with high-speed Classical CAN and CAN FD transceivers. All...
TJA1442AT Key Features
- ISO 11898-2:2016, SAE J2284-1 to SAE J2284-5 and SAE J1939-14 pliant
- Standard CAN and CAN FD data bit rates up to 5 Mbit/s
- Low Electromagnetic Emission (EME) and high Electromagnetic Immunity (EMI)
- Qualified according to AEC-Q100 Grade 1
- TJA1442A only: VIO input for interfacing with 3.3 V to 5 V microcontrollers
- All variants are available in SO8 and leadless HVSON8 (3.0 mm x 3.0 mm) packages
- Dark green product (halogen free and Restriction of Hazardous Substances (RoHS)
- Undervoltage detection with defined handling on all supply pins
- Full functionality guaranteed from the undervoltage detection thresholds up to the maximum limiting voltage values
- Defined behavior below the undervoltage detection thresholds
TJA1442AT Applications
- The TJA1442A is a high-speed CAN transceiver with Normal and Standby modes and a VIO supply pin. The VIO pin allows for direct interfacing with 3.3 V- and 5 V-s
- The TJA1442B is a high-speed CAN transceiver with Normal and Standby modes
- ISO 11898-2:2016, SAE J2284-1 to SAE J2284-5 and SAE J1939-14 pliant
- Standard CAN and CAN FD data bit rates up to 5 Mbit/s