Datasheet4U Logo Datasheet4U.com

UAA2067G - Image reject 1800 MHz transceiver for DECT applications

General Description

The UAA2067G is a low-power transceiver intended for use in portable and base station transceivers complying with the DECT system.

30 to +85°C temperature range.

Key Features

  • Receiver with:.
  • low noise amplifier.
  • dual quadrature mixers for image rejection (lower sideband).
  • I and Q combining networks at a fixed IF.
  • Both high-frequency and low-frequency VCOs including buffers with good isolation for low pulling.
  • Transmitter with:.
  • dual quadrature mixers for image rejection (lower sideband).
  • amplitude ramping circuit.
  • amplifier with high output power.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UAA2016 ZERO VOLTAGE SWITCH POWER CONTROLLER Motorola
UAA2016 Zero Voltage Switch Power Controller ON Semiconductor
UAA2022 16-Segment LED Driver Motorola
UAA1001 Sensor IC ITT Semiconductors
UAA1004-CM Zero Voltage Switch ETC

Other Datasheets by NXP Semiconductors

Part Number Description
UAA2062 Analog cordless telephone IC
UAA2068AHL Transmit chain and synthesizer with integrated VCO for DECT
UAA2068G Transmit chain and synthesizer with integrated VCO for DECT
UAA2050T Low Power Digital UHF Paging Receiver
UAA2073AM Image rejecting front-end for GSM applications

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET UAA2067G Image reject 1800 MHz transceiver for DECT applications Product specification Supersedes data of 1995 Sep 18 File under Integrated Circuits, IC17 1996 Oct 22 Philips Semiconductors Product specification Image reject 1800 MHz transceiver for DECT applications FEATURES • Receiver with: – low noise amplifier – dual quadrature mixers for image rejection (lower sideband) – I and Q combining networks at a fixed IF • Both high-frequency and low-frequency VCOs including buffers with good isolation for low pulling • Transmitter with: – dual quadrature mixers for image rejection (lower sideband) – amplitude ramping circuit – amplifier with high output power. APPLICATIONS • 1800 MHz transceiver for DECT hand-portable equipment • TDMA systems.