Datasheet4U Logo Datasheet4U.com

UBA2036TS - Full bridge control IC

General Description

The UBA2036 is a high voltage monolithic Integrated Circuit (IC) manufactured in a High Voltage Silicon On Insulator (HVSOI) process.

This circuit is designed for driving MOSFETs in a full bridge configuration.

Key Features

  • a disable function, an internal adjustable oscillator and an external clock input function with a high-voltage level shifter for driving the bridge. To guarantee an accurate 50 % duty cycle, the oscillator signal can be passed through a divider before being fed to the output drivers. The UBA2036 is especially suitable for High Intensity Discharge (HID) lamp drivers for car headlights, projectors and general lighting.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UBA2035TS HF Full-bridge control IC Philips
UBA2013 HB driver IC Philips
UBA2013L HB driver IC Philips
UBA2013T HB driver IC Philips
UBA2015 (UBA2015 / UBA2015A / UBA2016A) 600 V fluorescent lamp driver NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
UBA2030T Full bridge driver IC
UBA2032 Full bridge driver IC
UBA2033 HF full bridge driver
UBA2037 Full bridge control IC
UBA2000T Electronic TL-lamp starter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UBA2036TS Full bridge control IC for HID automotive lighting Rev. 01 — 30 October 2008 Product data sheet 1. General description The UBA2036 is a high voltage monolithic Integrated Circuit (IC) manufactured in a High Voltage Silicon On Insulator (HVSOI) process. This circuit is designed for driving MOSFETs in a full bridge configuration. In addition, it features a disable function, an internal adjustable oscillator and an external clock input function with a high-voltage level shifter for driving the bridge. To guarantee an accurate 50 % duty cycle, the oscillator signal can be passed through a divider before being fed to the output drivers.