Datasheet4U Logo Datasheet4U.com

A220 - N-Channel FET Synchronous Buck Regulator Controller for Low Output Voltages

General Description

The LM2727 and LM2737 are high-speed, synchronous, switching regulator controllers.

They are intended to control currents of 0.7A to 20A with up to 95% conversion efficiencies.

The LM2727 employs output over-voltage and undervoltage latch-off.

Key Features

  • The LM2737 and LM2737 operate from a low-current 5V bias and can convert from a 2.2V to 16V power rail. Both parts utilize a fixedfrequency, voltage-mode, PWM control architecture and the switching frequency is adjustable from 50kHz to 2MHz by adjusting the value of an external resistor. Current limit is achieved by monitoring the voltage drop across the onresistance of the low-side MOSFET, which enhances low duty-cycle operation. The wide range of operating frequencies gives the power supply d.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A220 High-speed diode NXP
A220 GaAs MMIC Down Converter for Micro Wave Application Hitachi Semiconductor
A220 PNP Silicon Transistor AUK corp
A2201 PNP Epitaxial Planar SIlicon Transistor Sanyo
A2203 1.1 WATT AUDIO POWER AMPLIFIER AiT Semiconductor

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM2727/LM2737 N-Channel FET Synchronous Buck Regulator Controller for Low Output Voltages June 2003 LM2727/LM2737 N-Channel FET Synchronous Buck Regulator Controller for Low Output Voltages General Description The LM2727 and LM2737 are high-speed, synchronous, switching regulator controllers. They are intended to control currents of 0.7A to 20A with up to 95% conversion efficiencies. The LM2727 employs output over-voltage and undervoltage latch-off. For applications where latch-off is not desired, the LM2737 can be used. Power up and down sequencing is achieved with the power-good flag, adjustable soft-start and output enable features. The LM2737 and LM2737 operate from a low-current 5V bias and can convert from a 2.2V to 16V power rail.