Datasheet4U Logo Datasheet4U.com

ADC1005 - 10-Bit uP Compatible A/D Converter

General Description

The ADC1005 is a CMOS 10-bit successive approximation A/D converter.

The 20-pin ADC1005 outputs 10-bit data in a two-byte format for interface with 8-bit microprocessors.

Key Features

  • n Easy interface to all microprocessors n Differential analog voltage inputs n Operates ratiometrically or with 5 VDC voltage reference or analog span adjusted voltage reference n 0V to 5V analog input voltage range with single 5V supply n On-chip clock generator n TLL/MOS input/output compatible n 0.3" standard width 20-pin DIP Key Specifications n Resolution n Linearity Error n Conversion Time 10 bits ± 1⁄2 LSB and ± 1 LSB 50 µs Connection Diagram ADC 1005 (for an 8.
  • bit data bus) Du.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADC1005S060 Single 10 bits ADC NXP Semiconductors
ADC100 Single & Dual Output DC/DC Converters MPS Industries
ADC1000 (ADC1000 - ADC4050) Custom Multi Element Silicon Photodiodes Advanced Detector
ADC1002S020 Single 10 bits ADC NXP Semiconductors
ADC1003S030 Single 10-bits ADC NXP Semiconductors

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
ADC1001 10-Bit uP Compatible A/D Converter
ADC10030 10-Bit/ 30 MSPS/ 125 mW A/D Converter
ADC10040 10-Bit/ 40 MSPS/ 3V/ 55.5 mW A/D Converter
ADC10061 10-Bit 600ns A/D Converter
ADC10062 10-Bit 600ns A/D Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADC1005 10-Bit µP Compatible A/D Converter June 1999 ADC1005 10-Bit µP Compatible A/D Converter General Description The ADC1005 is a CMOS 10-bit successive approximation A/D converter. The 20-pin ADC1005 outputs 10-bit data in a two-byte format for interface with 8-bit microprocessors. The ADC1005 has differential inputs to permit rejection of common-mode signals, allow the analog input range to be offset, and also to permit the conversion of signals not referred to ground. In addition, the reference voltage can be adjusted, allowing smaller voltage spans to be measured with 10-bit resolution.