Datasheet4U Logo Datasheet4U.com

ADC11DS105 - 105 MSPS A/D Converter

General Description

The ADC11DS105is a high-performance CMOS analog-todigital converters capable of converting two analog input signals into 11-bit digital words at rates up to 105 Mega Samples Per Second (MSPS).

The digital outputs are serialized and provided on differential LVDS signal pairs.

Key Features

  • Clock Duty Cycle Stabilizer Single +3.0 or +3.3V supply operation Serial LVDS Outputs Serial Control Inteface Overrange Outputs 60-pin LLP package, (9x9x0.8mm, 0.5mm pin-pitch) Key Specifications.
  • Resolution Conversion Rate SNR (fIN = 240 MHz) SFDR (fIN = 240 MHz) Full Power Bandwidth Power Consumption 11 Bits 105 MSPS 66 dBFS (typ) 82 dBFS (typ) 1 GHz (typ) 1 W (typ).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADC11DS105 105 MSPS A/D Converter Texas Instruments
ADC11DV200 200 MSPS Low-Power A/D Converter Texas Instruments
ADC11DV200 200 MSPS Low-Power A/D Converter National Semiconductor Corporation
ADC1100 Dual Slope A/D Converter Analog Devices
ADC1105 Dual Slope A/D Converter Analog Devices

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
ADC11DL066 450 MHz Input Bandwidth A/D Converter
ADC1173 8-Bit/ 3-Volt/ 15MSPS/ 33mW A/D Converter
ADC1175 8-Bit/ 20MHz/ 60mW A/D Converter
ADC1175-50 8-Bit/ 50 MSPS/ 125 mW A/D Converter
ADC11C125 1.1 GHz Bandwidth A/D Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADC11DS105 Dual 11-Bit, 105 MSPS A/D Converter with Serial LVDS Outputs November 4, 2009 ADC11DS105 Dual 11-Bit, 105 MSPS A/D Converter with Serial LVDS Outputs General Description The ADC11DS105is a high-performance CMOS analog-todigital converters capable of converting two analog input signals into 11-bit digital words at rates up to 105 Mega Samples Per Second (MSPS). The digital outputs are serialized and provided on differential LVDS signal pairs. These converters use a differential, pipelined architecture with digital error correction and an on-chip sample-and-hold circuit to minimize power consumption and the external component count, while providing excellent dynamic performance. The ADC11DS105 may be operated from a single +3.0 or +3.3V power supply.