DAC-0802 Datasheet | National Semiconductor

DAC0800/DAC0802 8-Bit Digital-to-Analog Converters September 2006 .. DAC0800/DAC0802 8-Bit Digital-to-Analog Converters General Description The DAC0800 series are monolithic 8-bit high-speed current-output digital-to-analog converters (DAC) featuring typical settling times of 100 ns. When used as a multiplying DAC, monotonic performance over a 40 to 1 reference current range is possible. The DAC0800 series also Features high pliance plementary current outputs to allow differential output voltages of 20 Vp-p with simple resistor loads. The reference-to-full-scale current matching of better than ± 1 LSB eliminates the need for full-scale trims in most applications, while the nonlinearities of better than ± 0.1% over temperature minimizes system error accumulations. The noise immune inputs will accept a variety of logic levels. The performance and characteristics of the device are essentially unchanged over the ± 4.5V to ± 18V power supply range and power consumption at only 33 mW with ± 5V supplies is independent of logic input levels. The DAC0800, DAC0802, DAC0800C and DAC0802C are a direct replacement for the DAC-08, DAC-08A, DAC-08C, and DAC-08H, respectively. For single supply operation, refer to AN-1525. Features n n n n n n n n n n n Fast settling output current: 100 ns Full scale error: ± 1 LSB Nonlinearity over temperature: ± 0.1% Full scale current drift: ± 10 ppm/˚C High output pliance: - 10V to +18V plementary current outputs Interface directly with TTL, CMOS, PMOS and others 2 quadrant wide range multiplying capability Wide power supply range: ± 4.5V to ± 18V Low power consumption: 33 mW at ± 5V Low cost Typical Application 00568601 FIGURE 1. ± 20 VP-P Output Digital-to-Analog Converter (Note 4) Ordering...