National Semiconductor DM74LS253
The TRI-STATE outputs can interface directly with data lines of bus-organized systems With all but one of the common outputs disabled (at a high impedance state) the low impedance of the single enabled output will drive the bus line to a high or low logic level Features Y Y Y Y Y Y Y Y Y TRI-STATE version of LS153 with same pinout Schottky-diode-clamped transistors Permit multiplexing from N-lines to one line Performs parallel-to-serial conversion Strobe output control High fanout totem-pole outputs Typical propagation delay Data to output 12 ns Select to output 21 ns Typical power...| Part No. | DM74LS253 |
|---|---|
| Datasheet | DM74LS253 Download |
| Manufacturer |  National Semiconductor |
| Description | TRI-STATE Data Selectors/Multiplexers |
| Buy | Stock & Price |
GENERAL DESCRIPTION
Each of these Schottky-clamped data selectors multiplexers contains inverters and drivers to supply fully complementary on-chip binary decoding data selection to the AND-OR gates Separate output control inputs are provided for each of the two four-line sections The TRI-STATE outputs can interface directly with data lines of bus-organized systems With all but one of the common outputs disabled (at a high impedance state) the low impedance of the single enabled output will drive the bus line to a high or low logic levelFEATURES
Y Y Y Y Y Y Y Y Y TRI-STATE version of LS153 with same pinout Schottky-diode-clamped transistors Permit multiplexing from N-lines to one line Performs parallel-to-serial conversion Strobe output control High fanout totem-pole outputs Typical propagation delay Data to output 12 ns Select to output 21 ns Typical power dissipation 35 mW Alternate Military Aerospace device (54LS253) is available Contact a National Semiconductor Sales Office Distri...
