Datasheet4U Logo Datasheet4U.com

DS10CP152 - 1.5 Gbps 2X2 LVDS Crosspoint Switch

General Description

The DS10CP152 is a 1.5 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables.

Fully differential signal paths ensure exceptional signal integrity and noise immunity.

Key Features

  • DC - 1.5 Gbps low jitter, low skew, low power operation.
  • Pin configurable, fully differential, non-blocking.
  • architecture Wide Input Common Mode Voltage Range allows DCcoupled interface to LVDS, CML and LVPECL drivers On-chip 100Ω input and output termination minimizes insertion and return losses, reduces component count and minimizes board space 7 kV ESD on LVDS I/O pins protects adjoining components Small SOIC-16 space saving package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS10CP152 DS10CP152 1.5 Gbps 2X2 LVDS Crosspoint Switch (Rev. E) ETCTI
DS10CP152Q DS10CP152Q Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch (Rev. E) ETCTI
DS10CP152Q-Q1 DS10CP152Q Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch (Rev. E) ETCTI
DS10CP154A DS10CP154A 1.5 Gbps 4x4 LVDS Crosspoint Switch (Rev. C) ETCTI
DS1000 5-Tap Silicon Delay Line Dallas Semiconducotr

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS10CP152Q Automotive 1.5 Gbps 2X2 LVDS Crosspoint Switch
DS10CP154 1.5 Gbps LVDS Crosspoint Switch
DS10CP154A 1.5 Gbps 4x4 LVDS Crosspoint Switch
DS10BR150 1.0 Gbps LVDS Buffer / Repeater
DS10BR254 1.5 Gbps 1:4 LVDS Repeater

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DS10CP152 1.5 Gbps 2X2 LVDS Crosspoint Switch November 15, 2007 DS10CP152 1.5 Gbps 2X2 LVDS Crosspoint Switch General Description The DS10CP152 is a 1.5 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs. Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout.