Datasheet4U Logo Datasheet4U.com

DS26C31M - CMOS Quad TRI-STATE Differential Line Driver

General Description

The DS26C31 is a quad differential line driver designed for digital data transmission over balanced lines.

The DS26C31T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS.

Key Features

  • n n n n n n n n n n TTL input compatible Typical propagation delays: 6 ns Typical output skew: 0.5 ns Outputs will not load line when VCC = 0V DS26C31T meets the requirements of EIA standard RS-422 Operation from single 5V supply TRI-STATE outputs for connection to system buses Low quiescent current Available in surface mount Mil-Std-883C compliant Connection Diagrams Dual-In-Line Package 20-Lead Ceramic Leadless Chip Carrier (E) DS008574-1 Top View Order Number DS26C31TM or DS26C31TN See NS.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS26C31MQML DS26C31MQML CMOS Quad TRI-STATE Differential Line Driver (Rev. A) ETCTI
DS26C32AM DS26C32AT/DS26C32AM Quad Differential Line Receiver (Rev. C) ETCTI
DS26C32AMQML DS26C32AMQML Quad Differential Line Receiver (Rev. A) ETCTI
DS26C32AT DS26C32AT/DS26C32AM Quad Differential Line Receiver (Rev. C) ETCTI
DS2604 NPN TRIPLE DIFFUSED TYPE (HIGH POWER SWITCHING/ HAMMER DRIVE/ PULSE MOTOR DRIVE APPLICATIONS) Toshiba Semiconductor

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS26C31T CMOS Quad TRI-STATE Differential Line Driver
DS26C32AM Quad Differential Line Receiver
DS26C32AT Quad Differential Line Receiver
DS26F31M Quad High Speed Differential Line Drivers
DS26F31MQML Quad High Speed Differential Line Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS26C31T/DS26C31M CMOS Quad TRI-STATE Differential Line Driver June 1998 DS26C31T/DS26C31M CMOS Quad TRI-STATE ® Differential Line Driver General Description The DS26C31 is a quad differential line driver designed for digital data transmission over balanced lines. The DS26C31T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS. The DS26C31M is compatible with EIA standard RS-422; however, one exception in test methodology is taken (Note 8). This enables the construction of serial and terminal interfaces while maintaining minimal power consumption. The DS26C31 accepts TTL or CMOS input levels and translates these to RS-422 output levels.