DS26LS31M Datasheet PDF (Quad High Speed Differential Line Driver) | Download National Semiconductor DS26LS31M

DS26LS31M - Quad High Speed Differential Line Driver

This page provides the datasheet information for the DS26LS31M, a member of the HA1-DS26 Quad High Speed Differential Line Driver family.

Description

The DS26LS31 is a quad differential line driver designed for digital data transmission over balanced lines.

The DS26LS31 meets all the requirements of EIA Standard RS-422 and Federal Standard 1020.

Features

TRI-STATE ® outputs and logically ANDed complementary outputs. The inputs are all LS compatible and are all one unit load. Features n n n n n n n n n n Output skew.
2.0 ns typical Input to output delay.
10 ns typical Operation from single 5V supply Outputs won’t load line when VCC = 0V Four line drivers in one package for maximum package density Output short-circuit protection Complementary outputs Meets the requirements of EIA Standard RS-422 Pin compatible with AM26LS31 Avai.

Datasheet Details

Part number	DS26LS31M
Manufacturer	National Semiconductor
File Size	226.35 KB
Description	Quad High Speed Differential Line Driver
Datasheet	DS26LS31M Datasheet
Additional preview pages of the DS26LS31M datasheet.

📁 Similar Datasheet

DS26LS32MQML - Quad Differential Line Receivers (Texas Instruments)

DS26LV31QML - 3V Enhanced CMOS Quad Differential Line Driver (Texas Instruments)

DS26LV31T - 3V Enhanced CMOS Quad Differential Line Driver (Texas Instruments)

DS26LV32AQML - 3V Enhanced CMOS Quad Differential Line Receiver (Texas Instruments)

DS26LV32AT - 3V Enhanced CMOS Quad Differential Line Receiver (Texas Instruments)

DS2604 - NPN TRIPLE DIFFUSED TYPE (HIGH POWER SWITCHING/ HAMMER DRIVE/ PULSE MOTOR DRIVE APPLICATIONS) (Toshiba Semiconductor)

DS26101 - 8-Port TDM-to-ATM PHY (Maxim Integrated Products)

DS26102 - 16-Port TDM-to-ATM PHY (Maxim Integrated Products)

DS26303 - Octal Line Interface Unit (Maxim Integrated Products)

DS26324 - E1/T1/J1 Short-Haul Line Interface Unit (Dallas Semiconductor)

Full PDF Text Transcription

Click to expand full text

DS26LS31C/DS26LS31M Quad High Speed Differential Line Driver June 1998 DS26LS31C/DS26LS31M Quad High Speed Differential Line Driver General Description The DS26LS31 is a quad differential line driver designed for digital data transmission over balanced lines. The DS26LS31 meets all the requirements of EIA Standard RS-422 and Federal Standard 1020. It is designed to provide unipolar differential drive to twisted-pair or parallel-wire transmission lines. The circuit provides an enable and disable function common to all four drivers. The DS26LS31 features TRI-STATE ® outputs and logically ANDed complementary outputs. The inputs are all LS compatible and are all one unit load. Features n n n n n n n n n n Output skew — 2.

Published: Mar 30, 2005 |