Datasheet4U Logo Datasheet4U.com

DS481 - Low Power RS-485/RS-422 Multipoint Transceiver with Sleep Mode

General Description

The DS481 is a low-power transceiver for RS-485 and RS-422 communication.

The device contains one driver and one receiver.

The drivers slew rate allows for operation up to 2.0 Mbps (see Applications Information section).

Key Features

  • n n n n n n n Meets TIA/EIA RS-485 multipoint standard Sleep mode reduces ICC to 0.2 µA Guaranteed full load output voltage (V OD3) Low quiescent current: 200 µA typ.
  • 7V to +12V common-mode input voltage range TRI-STATE outputs on driver and receiver AC performance:.
  • Driver transition time: 25 ns typ.
  • Driver propagation delay: 40 ns typ.
  • Driver skew: 1 ns typ.
  • Receiver propagation delay: 200 ns typ.
  • Receiver skew: 20 ns typ Half-duplex flow th.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS4802 Low Voltage/ Micro Power/ High Performance/ Rail-To-Rail Dual Op-Amp Dallas Semiconducotr
DS4830 Optical Microcontroller Maxim Integrated Products
DS4830A Optical Microcontroller Maxim Integrated
DS4000 Digitally Controlled TCXO Dallas Semiconducotr
DS4025 240.192MHz IF SAW Filter Advance Information Mitel Networks Corporation

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS485 Low Power RS-485/RS-422 Multipoint Transceiver
DS40MB200 Dual 4 Gb/s 1:2 Mux/Buffer
DS42BR400 Quad 4.25 Gbps CML Transceiver
DS42MB100 4.25 Gbps 2:1/1:2 CML Mux/Buffer
DS42MB200 Dual 4.25 Gbps 2:1/1:2 CML Mux/Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS481 Low Power RS-485/RS-422 Multipoint Transceiver with Sleep Mode July 1998 DS481 Low Power RS-485/RS-422 Multipoint Transceiver with Sleep Mode General Description The DS481 is a low-power transceiver for RS-485 and RS-422 communication. The device contains one driver and one receiver. The drivers slew rate allows for operation up to 2.0 Mbps (see Applications Information section). The transceiver draws 200 µA of supply current when unloaded or 0.2 µA when in the automatic sleep mode. Sleep mode is activated by inactivity on the enables (DE and RE (Note 1)). Holding DE = L and RE (Note 1) = H for greater than 600 ns will enable the sleep mode. The DS481 operates from a single +5V supply.