Datasheet4U Logo Datasheet4U.com

DS8830 - Dual Differential Line Driver

Download the DS8830 datasheet PDF. This datasheet also covers the DS8830J variant, as both devices belong to the same dual differential line driver family and are provided as variant models within a single manufacturer datasheet.

General Description

The DS7830/DS8830 is a dual differential line driver that also performs the dual four-input NAND or dual four-input AND function.

TTL (Transistor-Transistor-Logic) multiple emitter inputs allow this line driver to interface with standard TTL systems.

Key Features

  • n Single 5V power supply n Diode protected outputs for termination of positive and negative voltage transients n Diode protected inputs to prevent line ringing n High speed n Short circuit protection Connection Diagram Dual-In-Line and Flat Package DS005799-2 Top View Order Number DS8830.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (DS8830J_NationalSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
DS8830 DUAL DIFFERENTIAL LINE DRIVERS Texas Instruments
DS8836 Quad NOR Unified Bus Receiver National
DS8839 Quad Tri-State Bus Transceivers National
DS8813D Multi-Phase PWM Controller Richtek
DS8816A Dual-Phase PWM Controller Richtek

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS8831 Dual TRI-STATE Line Driver
DS8832 Dual TRI-STATE Line Driver
DS8833 Quad TRI-STATE Bus Transceivers
DS8834 Quad TRI-STATE Bus Transceivers
DS8835 Quad TRI-STATE Bus Transceivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS7830/DS8830 Dual Differential Line Driver March 1992 DS7830/DS8830 Dual Differential Line Driver General Description The DS7830/DS8830 is a dual differential line driver that also performs the dual four-input NAND or dual four-input AND function. TTL (Transistor-Transistor-Logic) multiple emitter inputs allow this line driver to interface with standard TTL systems. The differential outputs are balanced and are designed to drive long lengths of coaxial cable, strip line, or twisted pair transmission lines with characteristic impedances of 50Ω to 500Ω. The differential feature of the output eliminates troublesome ground-loop errors normally associated with single-wire transmissions.