Datasheet4U Logo Datasheet4U.com

DS91C180 - Multipoint LVDS (M-LVDS) Line Driver/Receiver

General Description

The DS91D180 and DS91C180 are high-speed differential M-LVDS single drivers/receivers designed for multipoint applications with multiple drivers or receivers.

Key Features

  • n n n n n n n n n n Meets TIA/EIA-899 M-LVDS Standard Capable of driving 32 M-LVDS loads Controlled edge rates tolerant to stubs Wide Common Mode for Increased Noise Immunity DS91D180 has type 1 receiver input DS91C180 has type 2 Fail-safe support Up to 200 Mbps operation Industrial temperature range Single 3.3 V Supply 14L SOIC Package (JEDEC MS-012) Typical.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS91C180 100 MHz M-LVDS Line Driver/Receiver Pair Texas Instruments
DS91C176 100 MHz Single Channel M-LVDS Transceiver Texas Instruments
DS9100 Touch and Hold Probe Stampings Dallas Semiconducotr
DS9101 Multipurpose Maxim Integrated
DS9104 Digital Decoder Ring Dallas Semiconducotr

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS91C176 Multipoint-LVDS (M-LVDS) Transceivers
DS91D176 Multipoint-LVDS (M-LVDS) Transceivers
DS91D180 Multipoint LVDS (M-LVDS) Line Driver/Receiver
DS91M040 125 MHz Quad M-LVDS Transceiver
DS91M047 125 MHz Quad M-LVDS Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS91D180/DS91C180 Multipoint LVDS (M-LVDS) Line Driver/Receiver June 2006 DS91D180/DS91C180 Multipoint LVDS (M-LVDS) Line Driver/Receiver General Description The DS91D180 and DS91C180 are high-speed differential M-LVDS single drivers/receivers designed for multipoint applications with multiple drivers or receivers. Multipoint LVDS (M-LVDS) is a new bus interface standard (TIA/EIA-899) based on LVDS but including several enhancements to improve multipoint performance. M-LVDS devices have superior drive capability and can support up to 32 loads. Along with increased drive, M-LVDS devices are required to have a controlled edge rate to minimize reflections and EMI. The 1 nSec minimum edge rate is tolerant of stub lengths up to 2 inches in length.