Datasheet4U Logo Datasheet4U.com

DS92LV222A - Two Channel Bus LVDS MUXed Repeater

General Description

The DS92LV222A is a repeater designed specifically for the bridging of multiple backplanes in a rack.

The DS92LV222A utilizes low voltage differential signaling to deliver high speed while consuming minimal power with reduced EMI.

Key Features

  • a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector. The driver is selectable between 3.5 mA (100Ω load) and 8.5 mA (27Ω load) output loop currents depending upon the level applied to the ISEL pin. This allows for single termination (point-to-point) and also double termination (multipoint).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS92LV2411 Link-II Serializer/Deserializer Texas Instruments
DS92LV2412 Link-II Serializer/Deserializer Texas Instruments
DS92LV2421 Link-II Serializer/Deserializer Texas Instruments
DS92LV2422 Link-II Serializer/Deserializer Texas Instruments
DS92LV010A Bus LVDS 3.3/5.0V Single Transceiver Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
DS92LV2411 5-50MHz 24-Bit Channel Link II Serializer/Deserializer
DS92LV2412 5-50MHz 24-Bit Channel Link II Serializer/Deserializer
DS92LV2421 24-bit Channel Link-II Serializer/Deserializer
DS92LV2422 24-bit Channel Link-II Serializer/Deserializer
DS92LV010A Bus LVDS 3.3/5.0V Single Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS92LV222A Two Channel Bus LVDS MUXed Repeater May 1998 DS92LV222A Two Channel Bus LVDS MUXed Repeater General Description The DS92LV222A is a repeater designed specifically for the bridging of multiple backplanes in a rack. The DS92LV222A utilizes low voltage differential signaling to deliver high speed while consuming minimal power with reduced EMI. The RSEL pin and DE pins allow maximum flexibility as to which receiver/driver are used. The DS92LV222A repeats signals between backplanes and accepts or drives signals onto the local bus. It also features a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector. The driver is selectable between 3.5 mA (100Ω load) and 8.