DS96177 - RS-485/RS-422 Differential Bus Repeater

Product Overview

National Semiconductor

Part number	DS96177
Manufacturer	National Semiconductor
File Size	262.41 KB
Description	RS-485/RS-422 Differential Bus Repeater
Datasheet	DS96177 Datasheet
Additional preview pages of the DS96177 datasheet.

The DS96177 Differential Bus Repeater is a monolithic integrated device designed for one-way data communication on multipoint bus transmission lines.

This device is designed for balanced transmission bus line applications and meets EIA Standard RS-485 and RS-422A.

positive and negative current limiting and TRI-STATE ® outputs for the receiver and driver. The receiver features high input impedance, input hysteresis for increased noise immunity, and input sensitivity of 200 mV over a common mode input voltage range of.
12V to +12V. The driver features thermal shutdown for protection from line fault conditions. Thermal shutdown is designed to occur at a junction temperature of approximately 160˚C. The driver is designed to drive current loads up to 6.

DS9610B - High Voltage Synchronous Rectified Buck MOSFET Driver (Richtek)
DS9638QML - DS9638QML RS-422 Dual High Speed Differential Line Driver (Rev. A) (ETCTI)
DS96F172MQML - DS96F172MQML/DS96F174MQML EIA-485/EIA-422 Quad Differential Drivers (Rev. A) (ETCTI)
DS96F173MQML - DS96F173MQML/DS96F175MQML EIA-485/EIA-422 Quad Differential Receivers (Rev. A) (ETCTI)
DS96F174MQML - DS96F172MQML/DS96F174MQML EIA-485/EIA-422 Quad Differential Drivers (Rev. A) (ETCTI)
DS96F174MQML-SP - DS96F172MQML/DS96F174MQML EIA-485/EIA-422 Quad Differential Drivers (Rev. A) (ETCTI)
DS96F175MQML - DS96F173MQML/DS96F175MQML EIA-485/EIA-422 Quad Differential Receivers (Rev. A) (ETCTI)
DS96F175MQML-SP - DS96F173MQML/DS96F175MQML EIA-485/EIA-422 Quad Differential Receivers (Rev. A) (ETCTI)
DS9034PC - PowerCap (Dallas Semiconducotr)
DS9034PCI - PowerCap (Dallas Semiconducotr)

Other Datasheets by National Semiconductor

Published: Mar 30, 2005 |