Datasheet Details
| Part number | LM150 |
|---|---|
| Manufacturer | National Semiconductor (now Texas Instruments) |
| File Size | 226.23 KB |
| Description | 3-Amp Adjustable Regulators |
| Datasheet | LM150-NationalSemiconductor.pdf |
|
|
Overview: LM150 LM350A LM350 3-Amp Adjustable Regulators January 1995 LM150 LM350A LM350 3-Amp Adjustable Regulators.
| Part number | LM150 |
|---|---|
| Manufacturer | National Semiconductor (now Texas Instruments) |
| File Size | 226.23 KB |
| Description | 3-Amp Adjustable Regulators |
| Datasheet | LM150-NationalSemiconductor.pdf |
|
|
|
The LM150 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 3A over a 1 2V to 33V output range They are exceptionally easy to use and require only 2 external resistors to set the output voltage Further both line and load regulation are comparable to discrete designs Also the LM150 is packaged in standard transistor packages which are easily mounted and handled In addition to higher performance than fixed regulators the LM150 series offers full overload protection available only in IC’s Included on the chip are current limit thermal overload protection and safe area protection All overload protection circuitry remains fully functional even if the adjustment terminal is accidentally disconnected Normally no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors in which case an input bypass is needed An output capacitor can be added to improve transient response while bypassing the adjustment pin will increase the regulator’s ripple rejection Besides replacing fixed regulators or discrete designs the LM150 is useful in a wide variety of other applications Since the regulator is ‘‘floating’’ and sees only the input-to-output differential voltage supplies of several hundred volts can be regulated as long as the maximum input to output differential is not exceeded i e avoid short-circuiting the output By connecting a fixed resistor between the adjustment pin and output the LM150 can be used as a precision current regulator Supplies with electronic shutdown can be achieved by clamping the adjustment terminal to ground which programs the output to 1 2V where most loads draw little current The part numbers in the LM150 series which have a K suffix are packaged in a standard Steel TO-3 package while those with a T suffix are packaged in a TO-220 plasti
Compare LM150 distributor prices and check real-time stock availability from major suppliers. Prices and inventory may vary by region and order quantity.
| Brand Logo | Part Number | Description | Manufacturer |
|---|---|---|---|
 |
LM150 | ADJUSTABLE VOLTAGE REGULATORS THREE-TERMINAL 3 A | STMicroelectronics |
 |
LM150 | 3 AMP POSITIVE ADJUSTABLE VOLTAGE REGULATOR | Seme LAB |
 |
LM150 | 3-Amp Adjustable Regulator | Texas Instruments |
 |
LM150 | 3 Amp Positive Adjustable Regulator | Linear Technology |
| ETC | LM1500 | Half Size Voltage Controlled Crystal Oscillator | ETC |
| Part Number | Description |
|---|---|
| LM150A | 3-Amp Adjustable Regulators |
| LM1514 | Dual differential voltage comparator |
| LM1524D | Regulating Pulse Width Modulator |
| LM1525A | (LM1525A / LM1527A) PULSE WIDTH MODULATOR |
| LM1527A | (LM1525A / LM1527A) PULSE WIDTH MODULATOR |
| LM1558 | Dual Operational Amplifier |
| LM1572 | 500kHz Step-down Voltage Regulator |
| LM1575 | SIMPLE SWITCHER 1A Step-Down Voltage Regulator |
| LM1575HV | 1A Step-Down Voltage Regulator |
| LM1576-12 | Simple Switcherbb 3 Amp Step-Down Voltage Regulator |