Datasheet4U Logo Datasheet4U.com

LM2202 - 230 MHz Video Amplifier System

General Description

The LM2202 is a very high frequency video amplifier system intended for use in high resolution monochrome or RGB color monitor applications.

Key Features

  • n Wideband video amplifier (f.
  • 3dB = 230 MHz at VO = 4 VPP) Block and Connection Diagram DS012591-1 Order Number LM2202N or LM2202M See NS Package Number N20A or M20B © 1999 National Semiconductor Corporation DS012591 www. national. com Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage VCC Pins 4, 7, 16 to Ground Pins 5, 13, 15.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM220K5 1.5 Amp / 3 Terminal Negative Regulators Integrated Power
LM220W1-A2MN Liquid Crystal Display LG
LM220W1-B2MN Liquid Crystal Display LG
LM220WE1-TLA1 LCD LG
LM220WE1-TLB2 WSXGA+ TFT LCD LG

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM221 LM221/LM321 Precision Preamplifiers
LM221H LM221/LM321 Precision Preamplifiers
LM224 Low Power Quad Operational Amplifiers
LM2240 Programmable Timer/Counter
LM22676 3A SIMPLE SWITCHER Step-Down Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM2202 230 MHz Video Amplifier System April 1999 LM2202 230 MHz Video Amplifier System General Description The LM2202 is a very high frequency video amplifier system intended for use in high resolution monochrome or RGB color monitor applications. In addition to the wideband video amplifier the LM2202 contains a gated differential input black level clamp comparator for brightness control, a DC controlled attenuator for contrast control and a DC controlled sub contrast attenuator for drive control. The DC control for the contrast attenuator is pinned out separately to provide a more accurate control system for RGB color monitor applications. All DC controls offer a high input impedance and operate over a 0V to 4V range for easy interface to bus controlled alignment systems.