LM2675 Datasheet | National Semiconductor

Description The LM2675 series of regulators are monolithic integrated circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1A load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5.0V, 12V, and an adjustable output version. Requiring a minimum number of external ponents, these regulators are simple to use and include patented internal frequency pensation (Patent Nos. 5,382,918 and 5,514,947) and a fixed frequency oscillator. The LM2675 series operates at a switching frequency of 260 k Hz, thus allowing smaller sized filter ponents than what would be needed with lower frequency switching regulators. Because of its very high efficiency ( > 90%), the copper traces on the printed circuit board are the only heat sinking needed. A family of standard inductors for use with the LM2675 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies using these advanced ICs. Also included in the datasheet are selector guides for diodes and capacitors designed to work in switch-mode power supplies. Other features include a guaranteed ± 1.5% tolerance on output voltage within specified input voltages and output load conditions, and ± 10% on the oscillator frequency. External shutdown is included, featuring typically 50 µA stand-by current. The output switch includes current limiting, as well as thermal shutdown for full protection under fault conditions. To simplify the LM2675 buck regulator design procedure, there exists puter design software, LM267X Made Simple version 1.0. Features n n n n n n n n n n n n n n n Efficiency up to 96% Available in SO-8 and 8-pin DIP packages puter Design Software LM267X Made Simple Simple and easy to design with Requires only 5 external ponents Uses readily available standard inductors 3.3V, 5.0V, 12V, and adjustable output...