Datasheet4U Logo Datasheet4U.com

LM2686 - Regulated Switched Capacitor Voltage Converter

Datasheet Summary

Description

The LM2686 CMOS charge-pump voltage converter operates as an input voltage doubler and a +5V regulator for an input voltage in the range of +2.85V to +6.5V.

Three low cost capacitors are used in this circuit to provide up to 50mA of output current at +5.0V ( ± 5%).

Features

  • n n n n n n +5V regulated output Doubles input supply voltage TSSOP 14 package 80% typical conversion efficiency at 25mA Input voltage range of 2.85V to 6.5V Independent shutdown control pins.

📥 Download Datasheet

Datasheet preview – LM2686

Datasheet Details

Part number LM2686
Manufacturer National Semiconductor
File Size 204.03 KB
Description Regulated Switched Capacitor Voltage Converter
Datasheet download datasheet LM2686 Datasheet
Additional preview pages of the LM2686 datasheet.

📁 Similar Datasheet

  • LM2681 - Switched Capacitor Voltage Converter (Texas Instruments)
  • LM2682 - Switched Capacitor Voltage Doubling Inverter (Texas Instruments)
  • LM26 - Factory-Preset Thermostat (Texas Instruments)
  • LM26001 - 1.5-A Switching Regulator (Texas Instruments)
  • LM26001-Q1 - 1.5-A Switching Regulator (Texas Instruments)
  • LM26001B - 1.5A Switching Regulator (Texas Instruments)
  • LM26003 - 3-A Switching Regulator (Texas Instruments)
  • LM26003-Q1 - 3-A Switching Regulator (Texas Instruments)
  • LM2601 - Adapter Interface Circuit (Texas Instruments)
  • LM2601616A - 2.6 inch 16x16 Dot Matrix LED Display (LIGHTKEY)
Other Datasheets by National Semiconductor
  • LM268 - Precision Voltage Reference
  • LM2681 - Switched Capacitor Voltage Converter
  • LM2682 - Switched Capacitor Voltage Doubling Inverter
  • LM2685 - Dual Output Regulated Switched Capacitor Voltage Converter
  • LM2687 - Low Noise Regulated Switched Capacitor Voltage
  • LM26 - Factory Preset Thermostat
  • LM260 - Voltage Comparators
  • LM26001 - Switching Regulator

Full PDF Text Transcription

Click to expand full text
LM2686 Regulated Switched Capacitor Voltage Converter November 1999 LM2686 Regulated Switched Capacitor Voltage Converter General Description The LM2686 CMOS charge-pump voltage converter operates as an input voltage doubler and a +5V regulator for an input voltage in the range of +2.85V to +6.5V. Three low cost capacitors are used in this circuit to provide up to 50mA of output current at +5.0V ( ± 5%). The LM2686 operates at a 130 kHz switching frequency to reduce output resistance and voltage ripple. With an operating current of only 450µA (operating efficiency greater than 80% with most loads) and 6.0µA typical shutdown current, the LM2686 is ideal for use in battery powered systems. The device is in a small 14-pin TSSOP package.
Published: |