Datasheet4U Logo Datasheet4U.com

LM2751 - Capacitor White LED Driver

General Description

The LM2751 is a constant frequency switched capacitor charge pump with regulated output voltage options of 4.5V, and 5.0V.

Over the input voltage range of 2.8V to 5.5V the LM2751 provides up to 150mA of output current and requires only four low-cost ceramic capacitors.

Key Features

  • Regulated Output Options: 4.5V, 5.0V Output Voltage Regulated within 3% Peak Efficiency Over 90% 150mA (4.5V) or 80mA (5.0V) Output Current Capability Input Voltage Range: 2.8V to 5.5V Low Input and Output Voltage Ripple < 1µA Typical Shutdown Current Small Solution Size - NO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM2751 White LED Driver Texas Instruments
LM2750 Low-Noise Switched-Capacitor Boost Regulator Texas Instruments
LM2750-ADJ Low-Noise Switched-Capacitor Boost Regulator Texas Instruments
LM2753 High-Power Switched-Capacitor Voltage Converter and Flash LED Driver Texas Instruments
LM2754 800mA Switched Capacitor Flash LED Driver Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM2750 Low Noise/ 5.0V Regulated Switched Capacitor Voltage Converter
LM2753 High Power Switched Capacitor Voltage Convertor/Flash LED Driver
LM2754 800mA Switched Capacitor Flash LED Driver
LM2755 Charge Pump LED Controller
LM2756 Multi-Display Inductorless LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM2751 Regulated 2X, 1.5X Switched Capacitor White LED Driver April 2005 LM2751 Regulated 2X, 1.5X Switched Capacitor White LED Driver www.datasheet4u.com General Description The LM2751 is a constant frequency switched capacitor charge pump with regulated output voltage options of 4.5V, and 5.0V. Over the input voltage range of 2.8V to 5.5V the LM2751 provides up to 150mA of output current and requires only four low-cost ceramic capacitors. The LM2751 provides excellent efficiency without the use of an inductor by operating the charge pump in a gain of 3/2 or 2. The proper gain for maintaining regulation is chosen so that efficiency is maximized over the input voltage range.