Datasheet4U Logo Datasheet4U.com

LM3350 - Switched Capacitor Voltage Converter

General Description

The LM3350 is a CMOS charge-pump voltage converter which efficiently provides a 3.3V to 5V step-up, or 5V to 3.3V step-down.

The LM3350 uses four small, low cost capacitors to provide the voltage conversion.

Key Features

  • n Conversion of 3.3V to 5V, or 5V to 3.3V n Small Mini SO-8 package n No inductor required.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM335 Precision Temperature Sensors Texas Instruments
LM335 Precision temperature sensor STMicroelectronics
LM33550 3V Primary lithium-manganese dioxide (Li-MnO2)High power D-size spiral cell SAFT
LM335A Precision Temperature Sensors Texas Instruments
LM335A Precision temperature sensor STMicroelectronics

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM335 Precision Temperature Sensors
LM3351 Switched Capacitor Voltage Converter
LM3352 Regulated 200 mA Buck-Boost Switched Capacitor DC/DC Converter
LM3354 Regulated 90mA Buck-Boost Switched Capacitor DC/DC Converter
LM3354-3.7 Regulated 90mA Buck-Boost Switched Capacitor DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM3350 Switched Capacitor Voltage Converter December 1999 LM3350 Switched Capacitor Voltage Converter General Description The LM3350 is a CMOS charge-pump voltage converter which efficiently provides a 3.3V to 5V step-up, or 5V to 3.3V step-down. The LM3350 uses four small, low cost capacitors to provide the voltage conversion. It eliminates the cost, size and radiated EMI related to inductor based circuits, or the power loss of a linear regulator. Operating power conversion efficiency greater than 90% provides ideal performance for battery powered portable systems. The architecture provides a fixed voltage conversion ratio of 3/2 or 2/3. Thus it can be used for other DC-DC conversions as well. n n n n 4.2Ω typical step-up output impedance 1.