Datasheet4U Logo Datasheet4U.com

LM4830 - Two-Way Audio Amplification

General Description

The LM4830 is an integrated solution for two-way audio amplification.

It contains a bridge-connected audio power amplifier capable of delivering 1W of continuous average power to an 8Ω load with less than 1% THD from a 5V power supply.

Key Features

  • 4-bit digital control for 30 dB of volume attenuation Two selectable microphone inputs High performance microphone preamp Extra buffer for driving long cables No bootstrap capacitors or snubber circuits are necessary n Small Outline (SO) packaging n Thermal shutdown protection circuitry n n n n n.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM48310 Audio Power Amplifier Texas Instruments
LM48311 Audio Power Amplifier Texas Instruments
LM48311 Class D Audio Power Amplifier National Semiconductor Corporation
LM48312 Audio Power Amplifier Texas Instruments
LM4835 Stereo 2W Audio Power Amplifier Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM4831 Multimedia Computer Audio-Chip
LM48310 Class D Audio Power Amplifier
LM4832 Digitally Tone/Volume
LM4834 1.75W Audio Power Amplifier
LM4835 Stereo 2W Audio Power Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM4830 Two-Way Audio Amplification System with Volume Control January 1999 LM4830 Two-Way Audio Amplification System with Volume Control General Description The LM4830 is an integrated solution for two-way audio amplification. It contains a bridge-connected audio power amplifier capable of delivering 1W of continuous average power to an 8Ω load with less than 1% THD from a 5V power supply. It also has the capability of driving 100 mW into a single-ended 32Ω impedance for headset operation. There is a 30 dB attenuator in front of a bridged power amplifier with 6 dB of gain. The attenuation is controlled through 4 bits of parallel digital control; 15 steps of 2 dB each. The device also contains a microphone preamp with two selectable inputs.