LM4951A Datasheet | National Semiconductor

Description The LM4951A is an audio power amplifier designed for applications with supply voltages ranging from 2.7V up to 9V. The LM4951A is capable of delivering 1.8W continuous average power with less than 1% THD+N into a bridge connected 8Ω load when operating from a 7.5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external ponents. The LM4951A does not require bootstrap capacitors, or snubber circuits. The LM4951A features a low-power consumption active-low shutdown mode. Additionally, the LM4951A features an internal thermal shutdown protection mechanism and short circuit protection. The LM4951A contains advanced pop & click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions. The LM4951A is unity-gain stable and can be configured by external gain-setting resistors. Features - Pop & click circuitry eliminates noise during turn-on and - - - - - - - turn-off transitions Wide supply voltage range: 2.7V to 9V Low current, active-low shutdown mode Low quiescent current Thermal shutdown protection Short circuit protection Unity-gain stable External gain configuration capability Applications - - - - - Portable devices Cell phones Laptop puters puter speaker systems MP3 player speakers Key Specifications -  Wide Voltage Range -  Quiescent Power Supply Current (VDD = 7.5V) 2.5m A (typ) 1.8W (typ) 0.01µA (typ) 25ms (typ) 2.7V to 9V -  Power Output BTL at 7.5V, 1% THD -  Shutdown Current -  Fast Turn on Time Boomer® is a registered trademark of National Semiconductor Corporation. © 2008 National Semiconductor Corporation .national. .Data Sheet.in Typical Application 300578f4 FIGURE 1. Typical Bridge-Tied-Load (BTL) Audio Amplifier Application Circuit .national. .Data Sheet.in Connection Diagrams SD Package Top View Order Number LM4951ASD See NS Package Number SDC10A SD Package...